ASTM A106 steel pipe

ASTM A 106 Seamless Steel Pipes Grade C≤ Mn P≤ S≤ Si≥ Cr≤ Cu≤ Mo≤ Ni≤ V≤ A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Mechanical Properties: Grade RmMpa TensileStrength Mpa YieldPoint Elongation DeliveryCondition A ≥330 ≥205 20 Annealed B ≥415 ≥240 20 Annealed C ≥485 ≥275 20 Annealed Dimension Tolerances: PipeType PipeSizes Tolerances ColdDrawn OD ≤48.3mm ±0.40mm ≥60.3mm ±1%mm WT ±12.5% Abstract from  Tianjin Xinyue Steel Group

ASTM A 106 Seamless Steel Pipes Grade C≤ Mn P≤ S≤ Si≥ Cr≤ Cu≤ Mo≤ Ni≤ V≤ A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Mechanical Properties: Grade RmMpa TensileStrength Mpa YieldPoint Elongation DeliveryCondition A ≥330 ≥205 20 Annealed B ≥415 ≥240 20 Annealed C ≥485 ≥275 20 Annealed Dimension Tolerances: PipeType PipeSizes Tolerances ColdDrawn OD ≤48.3mm ±0.40mm ≥60.3mm ±1%mm WT ±12.5% Abstract from  http://www.xysteelpipe.com/info/ASTM-A-106-Seamless-Steel-Pipes-332-1.htm

ASTM A106 is Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service.  This specification 2 covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1 ⁄ 8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized. Abstract form ASTM A106.

    ASTM A106 covers seamless carbon steel pipe for high-temperature service in NPS 1/8 to NPS 48 [DN 6 to DN 1200] inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending,flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.  Abstract from ASTM A106 Standard.

ASTM A106/A53 Gr.B in stock. Contact sales@xysteelpipe.com for more info.